Wireless Pir Motion Alarm Detector For Smart Security Home Alarm System
Wireless PIR Motion Alarm Detector For Smart Security Home Alarm System comes with batteries (DC9V batteries)
Before buying, do check with your alarm panel system whether the specification of our wireless PIR can work with your alarm panel or not to avoid any mistakes.
1. Installation at the out door, place with pets, air-condition
nearby, direct sunshine, heat source and under the
rotating objects should be avoided.
2. Surface of installation should be firm with no vibration.
3. Installing the detector in the place where intruder pass
4. Fixing bracket on the wall by screw.
5. Hang the detector, it will work normally after turning on
the power switch.
Auto temperature compensation
No wiring, install very conveniently
Low battery indication
SMT design adopted
Operating voltage: 9V (powered by battery)
Battery lifespan: half to one years
Static current: 25uA
Alarm current: 15mA
Detecting distance: 12m
Detecting angle: 110°
IC code: 1527
Timing resistor: 330k
Radio frequency: 433MHz
Radio distance: 100M (in open area)
Low battery indicator: yellow LED
Alarm indicator: red LED
Operating temperature: -10 to +50
Environment humidity: 95% RH (no congelation)
Anti RF interference: 10MHz 1GHz 20V/m
Installation mode: wall mounted or hanged in corner
Installation height: 1.7 to 2.5m (2.2m is Proposed)
Outline Size: 59L*45W*107H mm
What's in the box:
Wireless PIR detector with 9V batterys
Tags: Wireless PIR Motion Alarm Detector, burglary alarm, security, safety, motion detector, light bulb, computer village mart, lagos, nigeria', PIR motion detector, Solar Motion Sensor LED Security Light, PIR Motion Sensor