4G/3G/2G GSM Network Signal Booster/Repeater
4G/3G/2G GSM Network Signal Booster/Repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.
Cell phone becomes especially helpful when people get into critical situations. In case of emergency a timely call can save somebody’s life.
Unfortunately, there are still some places where one can find themselves “out of coverage”. Usually those places are either too far from the cell phone base station or located inside underground constructions, for example:
- · Parking lots, tunnels
- · Big stores, office buildings
- · Cars, boats etc.
- · House in remote areas etc
How is mobile phone signal enhancer GSM/DCS/ 2G/3G/4G Working
- The outside antenna catches the low signal from the mobile base station and delivers it to the cell phone amplifier through the connection cable (coax).
- After the signal is accepted by the phone amplifier, the device amplifies it.
- Then this amplified signal goes through the connection cable (coax) to the inside antenna.• And after that, the amplified signal transmits to the cell phone.
4G/3G/2G GSM Network Signal Booster/Repeater Features:
Easy installation and operation your self no need to technical person, this device is just plug and play
SUPPORTS MULTIPLE USERS and DEVICES: Experience the fastest network speed with this device that extends your service range up to 60% farther than other boosters can
The network enhancer can support multiple phones and devices, allowing you and all your companions to experience increased signal strength for voice calling and Data internet at the same time with multiple users
FAST 3G and 4G DATA SPEED: Reliable cell signal and more consistent data speeds, faster data uploads and downloads.
Reduce radiation and increase battery life.
How to Set up 4G/3G/2G GSM Network Signal Booster/Repeater Setup in 4 easy steps
1 Mount the External Antenna where you have the strongest cell phone signal, typically on a roof or in an attic.
2 Connect the internal antenna to the Amplifier Base Unit and place where you need improved signal. Indoor antenna should connect “Mobile” end of Amplifier. There should be a minimum of 2 meters of separation between the Base Unit and External Antenna.
3 Run the coax cable (20 meters) between the Base Unit and External Antenna. External antenna should connect with “BTS” end of repeater.
4 Connect the power supply to the Amplifier Base Unit and plug into a power outlet and you are done!
1. This booster is suitable for consumer use.
2. Before use, you MUST register this device with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Although AT&T, Sprint, T-Mobile, Verizon and 90 additional carriers have already given consent for all consumers to use this device, you MUST still register. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
3. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
4. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
5. You MUST shut down if causing interference.
6. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
- Best to install the outdoor antenna directed to the base station (The booster shows the the strength of the signal received by outdoor antenna); So, please fix the outdoor antenna when the booster shows the strongest signal and then connect and fix the indoor antenna.
- The straight-line distance between the booster and outdoor or indoor antenna should be larger than 5m or equal to 5m;
If install the outdoor antenna on the roof, then must make sure the drop distance between the outdoor and indoor antennas is 3~5 meters or more, so as to avoid the signal sent by indoor antenna is received by outdoor antenna;
If install the outdoor antenna on the balcony, then must make sure the distance between the outdoor and indoor antennas is larger than 5 or 8 meters; The larger the distance is, the stronger the signal is.
- Signal blind area or weak signal area, such as underground parking lots or business places;
- Meeting rooms, small super-markets, scriptorium, small public area;
- Bar, dancing hall, coffee house, club and other entertainment places;
- Elevators and other places that not easy to arrange cables;
- Household, boats, vehicles, factories, etc.
Quantity 1 piece
Material Aluminum alloy
Network Type 2G , 3G , 4G
Network Details GSM , WCDMA ,
Frequency Range Working frequency: uplink: 1920~1990MHz / downlink: 2110~2180MHz,
Application Office, factory, meeting room, store, etc , Indoor , Outdoor
Frequency Range Uplink GSM 900MHz, uplink 890MHz-915MHz, 3G 2100MHz,
Frequency Range Down Link GSM 900MHz, downlink 935MHz-960MHz, 3G 2100MHz,
Max. Coverage Square Meters 500~3000 square meters
Gain (dBi) 65DBi
Output Power 30DBmW
Noise Figure (Db) <=4dB
Electromagnetic Compatibility ETS300609-4
I/O Impedance 50ohm
Tags: 4G/3G/2G GSM Network Signal Booster/Repeater, r, Generic, 4G/ 3G/2G, GSM, Network, Signal, Booster, lagos nigeria, , 4g signal booater/repeater, Triband GSM 3G 4G Signal Repeater Booster - 900/2100/1800mhz, , 3G/4G LTE Network Signal Booster Antenna, Mobile Network 3G/4G Repeater, GSM Signal Booster, Tri Band GSM 2g 3G 4G Wireless Cell Phone Signal Repeater Lte Network Phone Signal Booster for Intelligent Mobile Phone