Finger Touch Portable Interactive Whiteboard-FT8-V5-08060498353
Finger Touch Portable Interactive Whiteboard-FT8-V5 can turn any projection area to be the multi touch system (interactive board), such as a wall, floor, fabric screen, ordinary white(green)board, table, TV set, LCD screen and so on. Using Oway device, you can fully control your computer and any software on board by the finger or IR pen to make accurate writing and annotating.
Laser Image Calibration Technology
The finger touch FT8 with two parts: emitter and sensor. Emitter can be attached on flat surface. It emits infrared laser curtain on the surface which is about 1mm thick invisible light and parallel with the projection screen surface, 1-2mm above the screen surface. When the fingers or any non-transparent objects touch this virtual surface, the light will be reflected and detected by the sensor. Computer will figure out the position of the mouse by accurate calculating the reflected light position.
Many applicable scenarios
The product has many application scenarios. It can realize touch writing and play games on any surface, and can be used in large amusement parks, classrooms, meeting rooms, etc.
Easy to install
The product only needs to be connected to the computer、projector and the sensor, and the positioning is automatically completed. The installation is very convenient. The whole process only takes about 2 minutes.
High level of accuracy
After continuous development and testing of the product, the product can reach 17ms instant response, so that you will not feel any delay in the process of writing, and the 720p HD lens can further enhance the accuracy of the sensor, giving you the feeling of writing on paper.
Multi users (support 100 points)
Supports simultaneous use of 100 touch points, all software that supports windows native multi-touch support multiple points, for example, one finger writes and two fingers zoom in/out, multiple users are allowed to write at the same time.
Finger Touch Portable Interactive Whiteboard-FT8-V5 Specifications:
- Calibration: Automatic(5s) / Manual (25/36 points)/Semi Automatic (4 points)
- Gesture Recognition: Single finger is for Write, Two fingers for move, zoom in or out and scroll bar, Palm for Erase,Palm stay 2s for Spot, Palm two clicks for back to desktop.
- Multi-touch: Ten points touch, write and eraser can do together.
- Filter: Software auto-control, enhance stability.Minimum Active Size: 40 inch
- Max Active Size:120inch( no sunshine room);100inch( sunshine room)
- Technology: Laser Image Calibration Technology
- Positional Accuracy:±1 Pixel (Resolution: 4096*4096)
- Aspect Ratio: 4:3,16:9,16:10
- Projector ratio:3.0, installation distance:2.15~3.2M.
- Laser Beam: Short throw/ Long throw: 3units; Ultra short throw: 4units.
- Laser safety: CLASS I (safety laser)
- Wave of the laser: 808nm
- Power: 5w
- Power of Laser Beam:150mW/unit *3
- Power requirements: 5V/1.5A
- Signal refresh rate: 120fps.
- Connect: The sensor and computer are connected by USB Cable; Emitter and
- Sensor are wireless; Emitter just need power.
- Weight: 0.5kg
- OS Requirement: Windows XP, Vista, Windows 7, Windows 8, 10
- Software: Calibration software(driver) and whiteboard software
- Certification: CE, FCC
- Package: 1. Sensor 2.Emitter 3.Mounts 4.USB cable (12m) 5.Pionter 6.Power Adaptor 7. Manual,CD with software